Application
RFID warehouse management, RFID race timing, RFID animal tracking, RFID vehicle tracking, RFID supply chain, RFID library, RFID attendance, RFID laundry
Parameter
|
Performance |
||
|
Frequency |
865-868MHz/902-928MHz（Can be adjustable） |
|
|
Frequency modulation |
FHSS or fixed-frequency, can be set by software |
|
|
RF output |
10-33 dBm can be adjustable ；50 ohm load |
|
|
Number of Antenna |
4 Port TNC male connector |
|
|
Communication interface |
TCP/IP,RS232、RS485、Wiegand26/34 WIFI option |
|
|
RF chip |
IMPINJ R2000 INDY |
|
|
Communication Rate |
Serial rate 9600～115200bps，RJ45 is 10Mbps |
|
|
Firmware update |
Can be update |
|
|
GPIO |
2 inputs, 1 output |
|
|
Software |
Supply API SDK and VC and VB, Java |
|
|
Tag Operation Performance |
||
|
Read Distance |
8dbi Antenna configuration, typical read range: 3 to 20 m (depends on tag) |
|
|
Receiver Sensitivity |
Max -82 dBm; |
|
|
Return Loss |
10 dBm |
|
|
Protocol |
ISO-18000-6C（EPC G2），ISO-18000-6B |
|
|
Mechanical electrical performance |
||
|
Size |
197(Length)*197(Width)*37(Height)mm |
|
|
Power |
With 220V AC input, 12V/3A power adapter |
|
|
RF Port |
TNC |
|
|
Weight |
<2KG |
|
|
Humidity |
5% to 95%, Non-condensing |
|
|
IP Rating |
IEC IP51 |
|
|
Operating Tem. |
-20°C to +60°C |
|
|
Storage Tem. |
40°C to 80°C |
|
Support MQTT:
Issue subject: auto, receiving EPC tags recognized by all devices in the format of ID, IP, ANT, RSSI, EPC; A single device auto follows the device ID number. If the device defaults to auto1234567890, you can receive the corresponding device ID subject in the same format.
Accept two subscription messages:/setup/status to set the working status/ Setup/power;
Disconnection and reconnection; No development package;
Equipment data can be obtained anywhere in the world.
